QSFP+ 40G to 4 SFP+ 10G quad fan-out active optical AOC Patch Cord 3m length

Product Introduction QSFP+ 40G to 4 SFP+ 10G quad fan-out active optical AOC cable 3m length The QSFP-4SFP10-03AOC is a 3m long active fan-out optical cable with one QSFP+ connector and four SFP+ 10G connectors. Cable provides short distance (same shelf) inexpensive connectivity at up to 40G rates. It operates 4 independent 10G channels using… Continue reading QSFP+ 40G to 4 SFP+ 10G quad fan-out active optical AOC Patch Cord 3m length

200GBASE-AOC QSFPPlus Active Optical Cable

Product Introduction QSFP-200G-AOC3M Compatible 200G QSFP28 Active Optical Cable All our Active Optical Cables (AOC) cables are built to MSA (Multi Source Agreement) standards and are extensively tested to ensure 100% compatibility with a huge range of leading switch and device manufacturers. Our QSFP28 AOC cables are fully compliant with MSA SFF 8665 All our… Continue reading 200GBASE-AOC QSFPPlus Active Optical Cable

40G QSFP+ to QSFP+ Active Optical Cable

Product Introduction 40GBASE QSFP+ to QSFP+ Active Optical Cable QSFP+ to QSFP+ Connector active optical cable assemblies provide 4 fully duplex channels per cable supporting signal transmission rates up to 10 Gb/s & 14 Gb/s per channel. By its design, an AOC does not have any optical interfaces exposed eliminating the risk of contamination. The QSFP+ cable… Continue reading 40G QSFP+ to QSFP+ Active Optical Cable

40G QSFP to LC Breakout AOC Multimode Cable Cisco Compatible QSFP-8LC-AOC Active optical Cable

Product Introduction 40GBASE QSFP+ to 8 x LC Connectors Breakout Active Optical Cable QSFP+ to 8 LC Connector active optical cable assemblies provide 4 fully duplex channels per cable supporting signal transmission rates up to 10 Gb/s & 14 Gb/s per channel. By its design, an AOC does not have any optical interfaces exposed eliminating… Continue reading 40G QSFP to LC Breakout AOC Multimode Cable Cisco Compatible QSFP-8LC-AOC Active optical Cable

18 Years Factory E2000 Connector – PVC/LSZH Tight Buffered Simplex and Duplex Cable(GJFJV) – 10G-Link Fiber

Single Mode fiber is usually 9/125 in construction. This means that the core to cladding diameter ratio is 9 microns to 125 microns.Single Mode fiber optic cable has a small diametral core that allows only one mode of light to propagate. Because of this, the number of light reflections created as the light passes through… Continue reading 18 Years Factory E2000 Connector –
PVC/LSZH Tight Buffered Simplex and Duplex Cable(GJFJV) – 10G-Link Fiber

Low price for Dvi Extender Over Fiber – Professional Factory SCUPC-SCUPC Singlemode Duplex Fiber Patch Cable – 10G-Link Fiber

Product Introduction of the Singlemode (9/125) Duplex Fiber Patch Cable SCUPC/SCUPC Connectors Singlemode (9/125) Duplex Fiber Patch Cable fiber is generally yellow, with a blue connector, and a longer transmission distance. LC/LC Connector design ,LSZH Jacket Cables are classified by the connectors on either end of the cable; some of the most common cable configurations include FC-FC, FC-SC,… Continue reading Low price for Dvi Extender Over Fiber –
Professional Factory SCUPC-SCUPC Singlemode Duplex Fiber Patch Cable – 10G-Link Fiber

One of Hottest for Om1 Fiber Cable – Jumper MU/UPC-LC/UPC SM Simplex 3m LSZH 2.0mm – 10G-Link Fiber

Product Introduction MU fiber optic cable is fully match with NTT-MU style products, and it is NTT and JIS compliant. This small form factor connector is approximately half the size of the SC connector, and has a push-pull style design. The MU fiber patch connector features a pre-assembled body and precision molded plastic housing, and a free… Continue reading One of Hottest for Om1 Fiber Cable –
Jumper MU/UPC-LC/UPC SM Simplex 3m LSZH 2.0mm – 10G-Link Fiber

Manufacturer for Fiber Optic Patch Panel Mounted Enclosure – FTTH Fiber Optical Termination Box 1core with SC adapter – 10G-Link Fiber

Fiber optic faceplate  It is floor mounted or wall mounted, indoor, for end user, capable to handle fiber fusion, fiber cables and pigtails. FTTH Fiber optic faceplate with 2ports and ABS material Features: Radian appearance makes it slinky Suitable for various modules and multimedia interfaces Embedded chart and logo position make it easy to identity… Continue reading Manufacturer for Fiber Optic Patch Panel Mounted Enclosure –
FTTH Fiber Optical Termination Box 1core with SC adapter – 10G-Link Fiber

Good quality Nexus 5500 5672up Chassis 1ru – Custom & Wholesaler LC Multimode Fiber Optic Adapter,Beige Color – 10G-Link Fiber

LC/UPC to LC/UPC Duplex Multimode Fiber Optic Adapter ,Beige Color Fiber optic adapters are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection.LC to LC Simplex Fiber Adapter with ceramic sleeve. This plastic LC coupler is designed for mounting in panels with rectangular cutouts. These adapters feature ceramic alignment… Continue reading Good quality Nexus 5500 5672up Chassis 1ru –
Custom & Wholesaler LC Multimode Fiber Optic Adapter,Beige Color – 10G-Link Fiber

Factory made hot-sale Mode Conditioning Fiber Optic Patch Cables – LC 90 ° boot Fiber Optic Patch Cord/Jumper Made In China – 10G-Link Fiber

Product Introduction of the Multimode Duplex Fiber Patch Cable With LCUPC 90° Boot Connectors With LC to LC termination with 90° boot, this high quality fiber optic patch cable is specificially designed for ethernet, multimedia, or communication applications. The small LC connector takes HALF the size of traditional SC and ST fiber connectors, since it offers twice the port density of… Continue reading Factory made hot-sale Mode Conditioning Fiber Optic Patch Cables –
LC 90 ° boot Fiber Optic Patch Cord/Jumper Made In China – 10G-Link Fiber